I wanted to try setting up my Raspberry Pi-camera, and I wanted to integrate it with Domoticz.
I did some manual labor for setting up a dedicated IP-cam from scratch, but after searching around I found MotionPie ( https://github.com/ccrisan/motionPie ).
No point re-inventing the wheel, so I loaded it up according to the installation manual, and got it up network-wise.
The following is needed to be configured in order for Domoticz to work:
IP Address: <ipaddress>
If you create a dummy switch in Domoticz, you can have motionpie activate that switch using Motion Notifications:
Enable running of commands, and insert the following command:
Where <IP-to-domoticz> is self-explanatory, and <IDX> is the ID-number for the switch.
Don’t forget to edit the switch so it’s a motion sensor, and set a custom off-delay.
MotionPie won’t trigger it “off” for you.